LiveZilla Live Help
Beat the July price increase.
Call and order today!
 
866-845-7845 

Article Index
Pellet Stove NPS45
Product List

Napoleon® Exclusive Features

  • For maximum comfort, the NPS45 allows for convection blower adjustments, no matter what the heat setting is at
  • Flashing light warns you when fuel is expended
  • Fine-tuning adjustment modifies combustion air and/or pellet feed rate to the burn pot to compensate for poor quality pellets and/or venting variances
  • Purge cycle (on start-up, shutdown and every 60 minutes) cleans the burn pot of residue depositing it in the ash pan
  • From 8,000 to 40,000 BTU's (may vary depending on pellet quality)
  • Concealed, large capacity ash pan
  • FAILSAFE™ auto ignition and auger system allows you to start the fire quickly and easily
  • Large 55 lb, easy-loading hopper for up to 55 hours of continuous, trouble free operation (55lb capacity allows for a full 40lb bag of pellets to be added while 15lbs still remain in the hopper, eliminating the inconvenience of partial bags)
  • Easy to access, automated control panel
  • 3" or 4" pellet vent
  • A Napoleon® Go Green environmentally friendly product: pellet fuel is a renewable resource
  • Certified for bedrooms, bathrooms, bed sitting rooms and mobile homes
  • President’s Limited Lifetime Warranty

 


 

Pellet DoorsTrivet

Accessories

  • Hopper extension increases capacity to 80 lbs for extended long continuous burn
  • Decorative Sandstone Brick or Porcelain Reflective Radiant Panels
  • Optional decorative ceramic log set
  • Outside air kit with through the wall vent

NPS45 Pellet Stove

Specifications
 NPS45
Fuel Pellet
BTU Output
8,000 - 43,000
Hopper Capacity 55 lbs
Area Heated
up to 2,000 sq. ft.
Burn rate 1-5 lbs per hour
Burn time 55 hours low heat
Flue Diameter 3"
Electrical rating 115 volts, 3.6 Amps, 60 Hz
Blower kit Included
Mobile Home Approved Yes
  Additional Information
  • Small pellets will increase or decrease the stated burn rates and burn times
  • Differences of plus or minus 20% may occur depending on fuel quality

THIS HEATER HAD BEEN TESTED TO ASTM E 1509, UL 1482, ULC S627

scale

Line dimensions are to be used as a guide only. 
Please consult your installation manual for updated and precise measurements before proceeding to install or frame your Napoleon Fireplace.
Check all Local and National Building Codes and Gas Regulations

Manual Brochure