|
Napoleon
GD80NT-M Direct Vent Gas Fireplace
|
|
Shown with wrought iron door
set and custom stone
Shown
with arch opening with pull screens and custom stone
Shown
with Arched Hammertone copper doors and custom stone
Shown with arch opening with pull
screens and custom stone
TO
SEE OTHER MADISON DESIGN OPTIONS>>CLICK
HERE
- PhazeramicŪ burner technology featuring a randomly
flickering flame and realistic glowing ember bed
- Realistic, ceramic fiber, light-weight molded PHAZERŪ log
set for a natural wood burning look
- Large cast iron andirons and grate included
- Built-in adjustable flame and heat control
- 18" stainless steel flex connector with shut off
- Glowing rear night light with on/off switch
- Heat circulating blower with variable speed control
- Modulating thermostatic hand held remote control
- Safety pull screen included
- A clear, unobstructed view in a frameless finish through
high temperature, heat radiating, ceramic glass
- Concealed, easy to use controls for trouble-free performance
- Bathroom, bedroom bed sitting room approved and also suitable
for mobile homes
- President's Limited Lifetime Warranty
|
|
|
PRODUCT
SPECIFICATIONS
|
Specifications
|
GD80NT-M |
Fuel
|
Natural Gas
Propane |
BTU Input
Natural Gas
Propane |
43,000
43,000 |
BTU Output
Natural Gas
Propane |
33,540
34,400 |
|
Maximum Heating Efficiency
(Steady State)
Natural Gas
Propane
|
81%
80% |
|
Maximum Heating Efficiency
(AFUE)
Natural Gas
Propane
|
78%
79%
|
Installation
Manual
|
|
|
Napoleon
GD80NT-M ACCESSORIES
|
| PRODUCT # |
MODEL DESCRIPTION |
FINISH |
WT/lbs. |
| GD80NT-1M |
Madison top vent gas fireplace |
Natural gas |
197 |
| GD80PT-1M |
Madison top vent gas fireplace |
Propane |
197 |
| |
|
|
|
| MUST CHOOSE ONE FRAMING KIT TO COMPLETE UNIT |
|
|
| FK80-A |
Framing kit |
arched |
13 |
| FK80-R |
Framing kit |
rectangular |
12 |
| |
|
|
|
| MUST CHOOSE ONE SET OF PANELS TO COMPLETE UNIT |
|
|
| GD800-KT |
Decorative brick panels and hearth strip |
old town red |
16 |
| GD807-KT |
Decorative brick panels and hearth strip |
sandstone |
16 |
| GD806-KT |
Decorative brick panels and hearth strip |
herringbone-sandstone |
16 |
| PRP80 |
Porcelain reflective radiant panels & sandstone hearth strip |
30 |
| |
|
|
|
| OPTIONS/ACCESSORIES |
|
|
| DK80A-HC |
*Decorative doors Arched |
hammertone copper |
15 |
| DK80A-HP |
*Decorative doors Arched |
hammertone pewter |
15 |
| DK80R-HC |
*Decorative doors Rectangular |
hammertone copper |
15 |
| DK80R-HP |
*Decorative doors Rectangular |
hammertone pewter |
15 |
| EK80-A |
*Extension kit for arched doors with finish material from 1 3/4" to 2 3/4" |
5 |
| EK80-R |
*Extension kit for rectangular doors with finish material from 1 3/4" to 2 3/4" |
5 |
| GD525-WI |
**Complete faceplate with operable door |
wrought iron |
100 |
| GA-566 |
Hot air distribution kit w/ blower, 5' x 4" flex vent, register, speed switch & wiring harnesses |
|
11 |
| GA-72 |
Hot air exhaust kit (GA-566 also required) |
|
3 |
| GA-70 |
5' x 4" flex vent & coupler extension kit for GA-566 |
|
1 |
| W690-0005 |
110 volt thermostat for use with hot air distribution kit |
|
1 |
| W573-0007 |
Mill-pak High Temperature Sealant, 10.3 oz. Tube |
Black |
1 |
| STONE/MASONRY FINISHING TEMPLATE |
| The finishing template is designed as an installation tool to assist when facing a GD80 with stone or masonry products. In order to ensure glass door removal and installation of optional decorative doors, it is critical that no facing material protrude into the fireplace opening. This is a reusable tool/template which is recommended to be part of your installers equipment. |
| TEM80A |
Arched template |
23 |
|
| TEM80WI |
Arched template for GD525-KT |
23 |
| TEM80R |
Rectangular template |
22 |
| *NOTE: Decorative doors are designed to attach to the fireplace with finishing material protruding from 1/2" up to 1 1/2", extending finishing material beyond 1 1/2" will require an extension kit (EK80-A or EK80-R). |
| **NOTE: GD525-WI is dedicated for flush installation, finishing material must not protrude beyoud the face of the fireplace - use FK80-A for framing. |
| ***NOTE: Must also order PVA80. |
|
|
|
|
|
|
|
|
|
