NZ26 Wood Burning Fireplace

• Air control chamber that eliminates negative pressure problems
• Uses outside or inside air for combustion
• Full brick patterned refractory liner retains heat and supports overnight burn
• Exclusive PHAZER™ light weight ceramic baffle heats up quickly to help increase efficiency
• Four stainless steel secondary air tubes that create fascinating display of YELLOW DANCING FLAMES®
• Convenient and elegant, stainless steel log retainer and primary "bottom air feed" assists in cold start up and to "recharge" a small dying fire
• Air wash system insulated with ceramic fibre and protected with stainless steel cover plate eliminates deterioration and assures complete combustion, maintaining an extremely clean viewing glass
• Large "King Size" capacity ash pan (600 cu. in. capacity) with unique tri-fold lid and dual carrying handles
• Easy, single lever combustion control with optional motorized thermostat allows for automatic regulation of the burn rate
• Firebox aerodynamics allow you to open the door without drawing smoke into the room
• Heat radiating high temperature ceramic glass
• Variable speed switch and heat sensor for blower are factory per-installed ready to accept optional blower kit
• President's Limited Lifetime Warranty

Accessories

Additional Accessories

• Blower kit
• Thermostatic air damper control
• Central heating system
• Outside combustion air kit

Specifications

Specifications NZ26 Heat Output* 11,500 - 27,400 BTU Heat Output (high burn)** 70,000 BTU Firebox Capacity (cu. ft.) 1.7 Area Heated (sq. ft.) 2,000 Burn Time 9 hours Max log size 18" Emissions (grams per hour) 5.4 Flue Diameter 6" Outside Combustion Air yes Mobile Home Approved yes (USA only) Central Heating and/or Blower Optional Door size 27 7/8W x 19 1/2H Weight without bricks 262 LBS Weight of bricks 132 LBS *EPA rated BTU/h with softwood test fuel (for emissions only ) - no refueling **Wolf Steel Ltd own test showing realistic BTU using hardwood logs with regular refueling. Heat output will differ depending on chimney draft as well as type, moisture content and size of wood. BTU figures may vary with individual conditions The optional central heating blower and thermostatic control may be installed into it's own forced air duct work system Safety tested and listed to Standards in Canada and the United States: ULC S610-M87, ULC S627, UL 127 for zero clearance fireplaces and to S639-M87 for solid fuel burning masonry fireplaces

Manual Brochure